Cheap Powers 55002 Short Track-It Tool Review
6/28/10
Max JC610M Charger for Max Cordless SuperFramer
Cheap Max JC610M Charger for Max Cordless SuperFramer Review
Hitachi VH650 Round Head 1-1/4-Inch to 2-1/2-Inch Coil Framing Nailer
Cheap Hitachi VH650 Round Head 1-1/4-Inch to 2-1/2-Inch Coil Framing Nailer Review
6/27/10
Hitachi NV45AE Coil Roofing Nailer with Side Load Magazine
Cheap Hitachi NV45AE Coil Roofing Nailer with Side Load Magazine Review
6/23/10
Max SN883CH34 SuperFramer 34-Degree Strip Framer
Cheap Max SN883CH34 SuperFramer 34-Degree Strip Framer Review
I was strictly used as Hitachi framing gun, they are the brand I found that will continue to bump fire nails after years of use and abuse. The Paslode Nailer and I have owned guns stopped firing hump steadily with age. I decided to try the coach Max because it is both lighter and shorter than my beloved Hitachi NR83. It works as well as the Hitachi because it is lighter and shorter, I prefer the Max. The gun comes with a little cam on the trigger you must removebefore it bump fire. This function must be the contribution of the corporate lawyer to protect against a lawsuit. I recommend this gun to any professional structure which is looking for a smaller, lighter than the coach functions as well as a Hitachi.
6/21/10
6/19/10
Hardcore Tools® Pneumatic Flooring Cleat Nailer
Cheap Hardcore Tools® Pneumatic Flooring Cleat Nailer Review
6/18/10
BOSTITCH INDUSTRIAL PALLET NAILER Model N89C-1P
Cheap BOSTITCH INDUSTRIAL PALLET NAILER Model N89C-1P Review
6/15/10
Senco PC0938 Carrying Case for FIP25XP & SLS25XP Staplers
Cheap Senco PC0938 Carrying Case for FIP25XP & SLS25XP Staplers Review
6/11/10
6/9/10
Hitachi 728981 0.6-oz Short Fuel Rod / Cell for Gas Finish Nailers - 4 per Package
Cheap Hitachi 728981 0.6-oz Short Fuel Rod / Cell for Gas Finish Nailers - 4 per Package Review
6/6/10
Factory-Reconditioned Milwaukee 7145-81 3/4-Inch to 2-1/2-Inch 16 Gauge Straight Finish Nailer
Cheap Factory-Reconditioned Milwaukee 7145-81 3/4-Inch to 2-1/2-Inch 16 Gauge Straight Finish Nailer Review
6/4/10
Factory-Reconditioned Ryobi ZRP300 One+ Nailer/Stapler
Cheap Factory-Reconditioned Ryobi ZRP300 One+ Nailer/Stapler Review
I have been buying Ryobi tools for five years now. They work long and hard and are financially a good decision because of their low investment cost and high productivity. The seller shipped quickly and my tool has arrived and already pays for itself. I will buy again.
6/2/10
Senco 2K0103N FramePro 702XP FRH, Sequential Nailer
Cheap Senco 2K0103N FramePro 702XP FRH, Sequential Nailer Review
This nailer is robust and does the job. The most notable feature may be the aggressive style and robust appearance. It accepts "cheap" nails and I did not miss him as often as you'd expect from a pistol. I picked this nailer for $ 167.xx last year it was obvious to me. I have other Senco nailers and never really liked it, preferring the time Hitachi and Duo-Fast, however, this weapon is much better and I'm happy with it. This is no lightweightlightweight tool, but it is well designed, feature rich, professional quality nailer.
6/1/10
Pneu-Fast BD12DXRHG 3-1/4-by-0.120-Inch Tri-Coat Galvanized Ring Framing Nail for 28-Degree Framing Nailers, 1000-Count
Cheap Pneu-Fast BD12DXRHG 3-1/4-by-0.120-Inch Tri-Coat Galvanized Ring Framing Nail for 28-Degree Framing Nailers, 1000-Count Review
5/30/10
Pneu-Fast BD12D 3-1/4-by-0.131 Framing Nail for 28-Degree Framing Nailers, 2500-Count
Cheap Pneu-Fast BD12D 3-1/4-by-0.131 Framing Nail for 28-Degree Framing Nailers, 2500-Count Review
5/29/10
Pneu-Fast BD10DXRHG 3-by-0.120-Inch Tri-Coat Galvanized Ring Framing Nail for 28-Degree Framing Nailers, 1000-Count
Cheap Pneu-Fast BD10DXRHG 3-by-0.120-Inch Tri-Coat Galvanized Ring Framing Nail for 28-Degree Framing Nailers, 1000-Count Review
These nails worked very well in my gun Bostitch framing nail ... for less $ $ too!
Factory-Reconditioned Bostitch Industrial Concrete Nailer MIII812CNCT
Cheap Factory-Reconditioned Bostitch Industrial Concrete Nailer MIII812CNCT Review
5/27/10
Porta-Nails 40225 Face Nail Shoe (404 Porta-Nailer)
Cheap Porta-Nails 40225 Face Nail Shoe (404 Porta-Nailer) Review
I used this face nailing Brazilian Walnut to install and was impressed by her after the utility that I ruined several pieces during practice.
I recommend using this tool in conjunction with the Porta-JACK Pro "tool to speak (see my review) that the facility taking place on the floor provides a solid anchor for Nailer face. Drag the nailer against taking any face and push against to keep it rock steady. See my photos above from a recent redinstallation of an oak floor.
I used a short-handled hammer (not the one that comes with the Nailer) for better control. Use the tip of your foot to press the nailer against Jack and the use off-hand to press the handle of the nailer. Use the dominant hand on the hammer and nail down on the RAM, avoiding blows at an angle.
Drag the nailer the other side of the socket, repeat the steps above and nails again. Press the catch and drag the edge about 6 "and reset the outlet. Repeatprocess until all nails are in.
Use of this technigues with taking the boards are tight and the nailer will not slip while driving the nail. You can quickly deal with nail tips with professional results.
It is difficult to use the face-nailer well without taking, but you'll get better with time, the key being the use of a short-handled hammer that allows you to get the weight of the body directly above the nailer, pressing with your hand you offnails. Do you hit with the hammer if you have your face directly on the memory of your swing-up, as it hurts .....
5/25/10
Porta-Nails 418A Portamatic Evolution 18 Gauge Flooring Nailer
Cheap Porta-Nails 418A Portamatic Evolution 18 Gauge Flooring Nailer Review
5/24/10
Akuzuki Hardwood Floor Stapler & Cleat Nailer Nail Gun w/ Safety Trigger
Cheap Akuzuki Hardwood Floor Stapler & Cleat Nailer Nail Gun w/ Safety Trigger Review
I bought this nailer to install 1500 square feet 3 / 4 solid walnut for a customer. Rental fees would have exceeded the cost of purchasing the power tool and based on the comments, it seemed like a decent choice (and it was about the only type of nailer I do not own yet ...). Nailer arrived in a few days. Case is nice and has most everything needed to maintain the tool. Tool even comes with a standard air industrial Fiting installed.
He led almost all the spikes perfectlyand I only had one jamb that was caused by my lightly bumping the striker (which will partially drive a fastener) and then striking it for real - jamb was easily cleared by removing one plate with the tools provided. I used only Bostitch cleats.
I noticed that it didn't sit perfectly flat on the flooring with the base plate provided so I added a shim made from high pressure laminate (Formica) between the base plate and the nailer. The addition of that shim made the nailer sit perfectly on the wood. I didn't use it without but it shouldn't make too much of a difference.
The mallet provided with my nailer was very good and I had no problems with it at all as some of the others reported.; maybe they got the word. I did use it hard and for the entire 1500 sq. ft.
Now, the one flaw. I read some other reviews where they stated that the nailer started leaking air. This one did too but only intermittently. It would sometimes bleed a little air when the safety trigger remained compressed between shots. The leaking air did not affect the ability to drive fasteners at all and came and went about three times per room - not a big deal but a bit annoying. I did not rebuild the nailer with the o-rings provided. Figured I wait until it really didn't work.
I would recommend this nailer for the serious DIYer or the occasional flooring install for a remodeling contractor like myself.
5/22/10
Porter Cable FN250C 16 Gauge 2-1/2" Finish Nailer Kit
Cheap Porter Cable FN250C 16 Gauge 2-1/2" Finish Nailer Kit Review
5/17/10
Porter-Cable 60066 Overhaul Kit for COIL350 and FR350MAG Framing Nailers
Cheap Porter-Cable 60066 Overhaul Kit for COIL350 and FR350MAG Framing Nailers Review
I use a nail gun Coil350 every day, I have a Bostitch and Hitachi of three, I prefer the cable porter easier loading and better ability.for driving the money I would recommend a Porter Cable
5/15/10
18-Gauge Brad Nails - Bn18200 18 Ga 2In. Brad
Cheap 18-Gauge Brad Nails - Bn18200 18 Ga 2In. Brad Review
Subscribe to:
Posts (Atom)