3/31/10

DEWALT D55141FNBN Heavy-Duty 16-Gauge Finish Nailer/18-Gauge Brad Nail

Cheap DEWALT D55141FNBN Heavy-Duty 16-Gauge Finish Nailer/18-Gauge Brad Nail Review




I was confronted with an enormous amount of nailing a dining room chair that was to be renovated, crown moldings and panel, as well as new base layers 5 "and new window trim. I am a woodworker practiced but I've never been good at hand to drive nails. The amount of work ahead of me, he would have had to rent a compressor and nailer nailer at least two different weekends. For a couple of hundred, I realized that I could buy that platform and add it to my arsenal of power tools for not muchmore than I could rent it. Purchased it. implementation. Broke into the compressor according to instructions. Read the instructions, loaded and went to work. I know it is not informative, but: "Whoooo-WEEE!" Talk about turning a job in almost fun! Both weapons are easy to load and use. The only complaint is that they come with trigger that can not "bump" nailing. I'm not in a hurry so this is not much of an agreement ... Besdies, if it bothers me later DeWalt replacement offerTriggers for nailers. The compressor is very nice and has no trouble keeping up. Just a great set up. I think the use of a ridiculous extravagance when I would see a woodworker using a pneumatic nailer Brad on a project. Now I have one and see how fast it is easy to set up and fire, I will never hand drive another nail.


Porter-Cable 60008 Bottom Maintenance Kit (DA250, MS200)

Cheap Porter-Cable 60008 Bottom Maintenance Kit (DA250, MS200) Review





Porter-Cable PC1PAK Factory Reconditioned Finish Nailer and Compressor

Cheap Porter-Cable PC1PAK Factory Reconditioned Finish Nailer and Compressor Review





2" 18 guage finish nailer

Cheap 2" 18 guage finish nailer Review





3/30/10

501000 Paslode Power Master Plus Clipped Head Framing

Cheap 501000 Paslode Power Master Plus Clipped Head Framing Review





CADEX 23 Gauge Slight Headed Brad Nails, 1/2" x 4000 pk

Cheap CADEX 23 Gauge Slight Headed Brad Nails, 1/2" x 4000 pk Review





Pneu-Fast BD8D 2-3/8-by-0.113 Framing Nail for 28-Degree Framing Nailers, 5000-Count

Cheap Pneu-Fast BD8D 2-3/8-by-0.113 Framing Nail for 28-Degree Framing Nailers, 5000-Count Review





Simpson PT-27 27 Cal. 10 Shot Strip Tool

Cheap Simpson PT-27 27 Cal. 10 Shot Strip Tool Review





3/29/10

Driver Piston Kit, #20 For OFN2890

Cheap Driver Piston Kit, #20 For OFN2890 Review





Freeman PFN1564 15 Gauge 34 Degree 2-1/2-Inch Angled Finish Nailer

Cheap Freeman PFN1564 15 Gauge 34 Degree 2-1/2-Inch Angled Finish Nailer Review





hardwood flooring Staple gun kit Hardcore Tools®

Cheap hardwood flooring Staple gun kit Hardcore Tools® Review





Paslode 650535 3-1/4-Inch by .131 Smooth 1M Fuel and Nail Pack

Cheap Paslode 650535 3-1/4-Inch by .131 Smooth 1M Fuel and Nail Pack Review





Porta-Nails 4704 16 Gauge 1-1/2-Inch Flooring Nails (1,000 per Box)

Cheap Porta-Nails 4704 16 Gauge 1-1/2-Inch Flooring Nails (1,000 per Box) Review





3/27/10

Senco FinishPro 42XP 15 Gauge 1-1/4-Inch to 2-1/2-Inch Finish Nailer with Case

Cheap Senco FinishPro 42XP 15 Gauge 1-1/4-Inch to 2-1/2-Inch Finish Nailer with Case Review




This nailgun does not disappoint as well as all other products Senco. There is a strong oak nailer difficult steps and is very consistent in setting the nails in the trim work I install. I want to buy this item again. It is also lighter than the Senco finish nailer others I have owned in the past. More is the worry of oiling every day, there are no more worries of oil to get what I am when I accidentally nail oil, which is rare but can happen. I am a carpenter Trim / staircase and thisis an excellent nail gun.


Factory-Reconditioned Bostitch U/CPACK1 2-in-1 Brad Nailer/Narrow Crown Stapler Tool and Compressor

Cheap Factory-Reconditioned Bostitch U/CPACK1 2-in-1 Brad Nailer/Narrow Crown Stapler Tool and Compressor Review




Hi all,

I bought this combo for purposes that most owners will use it for: inflating tires and water toys, running a couple different nailers, blasting dust, perhaps a little pistol etc. For these purposes and occasional use, it's really good. To use regular or high power tools, I suggest an oiled unit with greater capacity.

Anyway, lets start with the good:
The value can not be beaten. It came with all the elements mentioned and was sent to mydoor for less than $ 150. The nail gun, seems to be good, even if it leaves the brad just above the wood surface. I like the box included. I believe there is a depth adjustment, but I have not played with it too. It offers good power for general purposes. The compressor is easy to move and do not scroll too often when using the nail gun or air pistol. It is not deafening, but not exceptionally quiet. The kit comes with all the accessories you need to startexcept the damaged pipe.

The bad:
The freight company has been unable, and I was called back several times because they could not find my house. Expect delivery to take 14 days. The packaging was poor, and I think that the defects couple was a product of this place the unit under renovation. The intake hose Air cracked in two. I do not believe it, because I intended to buy a pipe for a better way, but it sounds like it would do everything you sendback if this happens, what is not acceptable. Just plan on spending an additional $ 25 on a tube well and save you the hassle of a coil pipe cheap. I hope that the governor was not plastic, because I think it will wear out quickly. The compressor is slightly larger than the equivalent of cable. These referrals were all miners.

For the money, as the unit does not burn me somewhere down the road, I am very satisfied.


Max HN90 PowerLite Framer 400Psi Coil Nailer 1-3/4" To 3-1/2"

Cheap Max HN90 PowerLite Framer 400Psi Coil Nailer 1-3/4" To 3-1/2" Review





HIGH GRADE Cadex 23 gauge pins, 1-3/4" (45MM) - 4000 PK

Cheap HIGH GRADE Cadex 23 gauge pins, 1-3/4" (45MM) - 4000 PK Review





3/26/10

Senco FinishPro35 15-Gauge Finish Nailer, Sequential, w/Case

Cheap Senco FinishPro35 15-Gauge Finish Nailer, Sequential, w/Case Review




I bought the gun in a set with the brad nailer and stapler. I used a few times immediately after passing air tools from the old (hammer and nails). As a new user, I can say the Senco is very easy to understand how to use and very difficult to jam. I did once the jam by placing nails in reverse, but it was an easy (once I realized what I had done). The nails are a little pricy, but using the gun is a snap assembly operations.

The rifle has a depthadjustment nail board, but you can just as easily regulate the pressure at the compressor. Mine came with everything needed to get rolling - except nails, gross. HD proceed Senco nails, if availability is not a problem. You can also use other brands, I did without problem.

The main reason I chose was the Senco brand reputation and the fact that you can use other brands of nails. I am convinced that the quality of weapons that I have received is that ISenco expected.


Powernail 20 Gage 1-1/4" E-cleats. Box of 2,000

Cheap Powernail 20 Gage 1-1/4" E-cleats. Box of 2,000 Review





Rs22kit Powder Actuated Tool - Itw Brands - Ramset

Cheap Rs22kit Powder Actuated Tool - Itw Brands - Ramset Review





Factory-Reconditioned Bostitch Impact Nailer Kit PN100K

Cheap Factory-Reconditioned Bostitch Impact Nailer Kit PN100K Review





Campbell Hausfeld CHN80199RB NA Nailer Kit (2-1/2" Finish and 2 in 1 Nailer/Stapler) CHN80199RB

Cheap Campbell Hausfeld CHN80199RB NA Nailer Kit (2-1/2" Finish and 2 in 1 Nailer/Stapler) CHN80199RB Review